| 1. |
Suitable for extrusion
moulds and casting moulds temperature control |
| 2. |
Unified temperature distribution profile in the moulds
help to eliminate the problems such as air hole, shrinkage,
thickness variation |
| 3. |
match with Thermal Heater and replace electrical centalized Mould Heating system the total energy conservation can be save up to 60% |
| 4. |
Compare with electric system, energy saving can be over
50% |
| 5. |
Temperature Accuracy is within +/-2℃ |
| 6. |
Temperature range 20℃ ~ 280℃ |
| 7. |
With cooling cycle to remove the tool in shorter time, increasing
production rate |
| 8. |
With thermal oil recovery suction circle to recover thermal
oil inside moulds |
| 9. |
With inlet, outlet temperature display and control |
| 10. |
Proportional temperature controller and three-way control
valve to maintain steady temperature |
| 11. |
With low noise seal-less thermal oil pump |
| 12. |
Modular design, parts are easy to be removed for maintenance
and service |
